How the relative measurement modifier interacts with stack views – Ole Begemann

I’ve another factor to say on the relative sizing view modifier from my earlier submit, Working with percentages in SwiftUI format. I’m assuming you’ve learn that article. The next is nice to know if you wish to use the modifier in your individual code, however I hope you’ll additionally study some normal tidbits about SwiftUI’s format algorithm for HStacks and VStacks.

Utilizing relative sizing inside a stack view

Let’s apply the relativeProposed modifier to one of many subviews of an HStack:

HStack(spacing: 10) {
    Coloration.blue
        .relativeProposed(width: 0.5)
    Coloration.inexperienced
    Coloration.yellow
}
.border(.major)
.body(top: 80)

What do you anticipate to occur right here? Will the blue view take up 50 % of the accessible width? The reply is not any. Actually, the blue rectangle turns into narrower than the others:

It’s because the HStack solely proposes a proportion of its accessible width to every of its youngsters. Right here, the stack proposes one third of the accessible house to its first baby, the relative sizing modifier. The modifier then halves this worth, leading to one sixth of the overall width (minus spacing) for the blue colour. The opposite two rectangles then develop into wider than one third as a result of the primary baby view didn’t burn up its full proposed width.

Order issues

Now let’s transfer the modifier to the inexperienced colour within the center:

HStack(spacing: 10) {
    Coloration.blue
    Coloration.inexperienced
        .relativeProposed(width: 0.5)
    Coloration.yellow
}

Naively, I’d anticipate an equal consequence: the inexperienced rectangle ought to develop into 100 pt vast, and blue and yellow must be 250 pt every. However that’s not what occurs — the yellow view finally ends up being wider than the blue one:

I discovered this unintuitive at first, but it surely is sensible should you perceive that the HStack processes its youngsters in sequence:

1. The HStack proposes one third of its accessible house to the blue view: (620 – 20) / 3 = 200. The blue view accepts the proposal and turns into 200 pt vast.

2. Subsequent up is the relativeProposed modifier. The HStack divides the remaining house by the variety of remaining subviews and proposes that: 400 / 2 = 200. Our modifier halves this proposal and proposes 100 pt to the inexperienced view, which accepts it. The modifier in flip adopts the dimensions of its baby and returns 100 pt to the HStack.

3. Because the second subview used much less house than proposed, the HStack now has 300 pt left over to suggest to its ultimate baby, the yellow colour.

Necessary: the order by which the stack lays out its subviews occurs to be from left to proper on this instance, however that’s not at all times the case. Generally, HStacks and VStacks first group their subviews by format precedence (extra on that beneath), after which order the views inside every group by flexibility such that the least versatile views are laid out first. For extra on this, see How an HStack Lays out Its Youngsters by Chris Eidhof. The views in our instance are all equally versatile (all of them can develop into any width between 0 and infinity), so the stack processes them of their “pure” order.

Leftover house isn’t redistributed

By now chances are you’ll have the opportunity guess how the format seems once we transfer our view modifier to the final baby view:

HStack(spacing: 10) {
    Coloration.blue
    Coloration.inexperienced
    Coloration.yellow
        .relativeProposed(width: 0.5)
}

• Blue and inexperienced every obtain one third of the accessible width and develop into 200 pt vast. No surprises there.

• When the HStack reaches the relativeProposed modifier, it has 200 pt left to distribute. Once more, the modifier and the yellow rectangle solely use half of this quantity.

The top result’s that the HStack finally ends up with 100 pt left over. The method stops right here — the HStack does not begin over in an try and discover a “higher” resolution. The stack makes itself simply large enough to include its subviews (= 520 pt incl. spacing) and stories that measurement to its mum or dad.

Structure precedence

We are able to use the layoutPriority view modifier to affect how stacks and different containers lay out their youngsters. Let’s give the subview with the relative sizing modifier a better format precedence (the default precedence is 0):

HStack(spacing: 10) {
    Coloration.blue
    Coloration.inexperienced
    Coloration.yellow
        .relativeProposed(width: 0.5)
        .layoutPriority(1)
}

This leads to a format the place the yellow rectangle really takes up 50 % of the accessible house:

Clarification:

1. The HStack teams its youngsters by format precedence after which processes every group in sequence, from highest to lowest precedence. Every group is proposed the complete remaining house.

2. The primary format group solely incorporates a single view, our relative sizing modifier with the yellow colour. The HStack proposes the complete accessible house (minus spacing) = 600 pt. Our modifier halves the proposal, leading to 300 pt for the yellow view.

3. There are 300 pt left over for the second format group. These are distributed equally among the many two youngsters as a result of every subview accepts the proposed measurement.

Conclusion

The code I used to generate the photographs on this article is offered on GitHub. I solely checked out HStacks right here, however VStacks work in precisely the identical method for the vertical dimension.

SwiftUI’s format algorithm at all times follows this fundamental sample of proposed sizes and responses. Every of the built-in “primitive” views (e.g. fastened and versatile frames, stacks, Textual content, Picture, Spacer, shapes, padding, background, overlay) has a well-defined (if not at all times well-documented) format habits that may be expressed as a perform (ProposedViewSize) -> CGSize. You’ll must study the habits for view to work successfully with SwiftUI.

A concrete lesson I’m taking away from this evaluation: HStack and VStack don’t deal with format as an optimization drawback that tries to seek out the optimum resolution for a set of constraints (autolayout model). Slightly, they kind their youngsters in a selected method after which do a single proposal-and-response cross over them. If there’s house leftover on the finish, or if the accessible house isn’t sufficient, then so be it.